QRP Guys Portable No Tune End Fed Half Wave Antenna, Assembled
QRP Portable No Tune End Fed Half Wave Antenna, Assembled
Single-band 80m-10m end-fed half-wave wire antenna provides the antenna, it is designed as a highly portable wire antenna that can be easily set up as an inverted-V, horizontal, inclined, or vertical radiator (in the case of higher frequencies).Your feeder is inherently balanced ground, so no separate feeder is required.High impedance half wave wire matched to your 50-ohm feed point via integrated impedance matching toroidal transformer, rated at 10 watts.Use high voltage capacitors on the transformer primary with a specific radiator length to further expand and reduce SWR in the range of 80m-10m.It is designed to be used without a tuner and after optimizing the driven element, SWR ≤ 1.2 for any part of the frequency band
Product parameters:
Condition: Brand new and high-quality
Item Name: Half Wave Antenna
Impedance: 50 ohms
Size: 100*71mm
Style: Finished
Package list:
End-fed half-wave antenna *1
Fully Assembled
Product of China
Antenna wire is not included, below is a link for an excellent source for the wire:
QRP Portable No Tune End Fed Half Wave Antenna, Assembled
Single-band 80m-10m end-fed half-wave wire antenna provides the antenna, it is designed as a highly portable wire antenna that can be easily set up as an inverted-V, horizontal, inclined, or vertical radiator (in the case of higher frequencies).Your feeder is inherently balanced ground, so no separate feeder is required.High impedance half wave wire matched to your 50-ohm feed point via integrated impedance matching toroidal transformer, rated at 10 watts.Use high voltage capacitors on the transformer primary with a specific radiator length to further expand and reduce SWR in the range of 80m-10m.It is designed to be used without a tuner and after optimizing the driven element, SWR ≤ 1.2 for any part of the frequency band
Product parameters:
Condition: Brand new and high-quality
Item Name: Half Wave Antenna
Impedance: 50 ohms
Size: 100*71mm
Style: Finished
Package list:
End-fed half-wave antenna *1
Fully Assembled
Product of China
Antenna wire is not included, below is a link for an excellent source for the wire:
QRP Portable No Tune End Fed Half Wave Antenna, Assembled
Single-band 80m-10m end-fed half-wave wire antenna provides the antenna, it is designed as a highly portable wire antenna that can be easily set up as an inverted-V, horizontal, inclined, or vertical radiator (in the case of higher frequencies).Your feeder is inherently balanced ground, so no separate feeder is required.High impedance half wave wire matched to your 50-ohm feed point via integrated impedance matching toroidal transformer, rated at 10 watts.Use high voltage capacitors on the transformer primary with a specific radiator length to further expand and reduce SWR in the range of 80m-10m.It is designed to be used without a tuner and after optimizing the driven element, SWR ≤ 1.2 for any part of the frequency band
Product parameters:
Condition: Brand new and high-quality
Item Name: Half Wave Antenna
Impedance: 50 ohms
Size: 100*71mm
Style: Finished
Package list:
End-fed half-wave antenna *1
Fully Assembled
Product of China
Antenna wire is not included, below is a link for an excellent source for the wire:
